FS 1951 CA
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=185219
Printed Date: 02 May 2025 at 12:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: FS 1951 CA
Posted By: PaulB
Subject: FS 1951 CA
Date Posted: 19 Dec 2021 at 7:15am
I have this 1951 model CA pin hitch tractor available that sells with 2 row cultivators. This is a pin hitch tractor and was originally a magneto tractor that now has a distributer conversion. It has a 6 volt system. The engine runs great and has most likely had engine work done before I got it. It has matching Safemark tires all around, 5.00X15 fronts, 12.4X24 rear. Located in Maryland, very near Gettysburg Pa.  It has many NEW parts; Engine clutch wiring harness, switches & amp gauge Radiator, thermostat & Temperature gauge Electronic Ignition conversion & coil Voltage regulator seat pan  Here's the engine oil pressure at idle when warm.  It has had the axle clutch rebuilt and it doesn't slip. The rebuilt generator is a 2 brush style from a D10 that has a higher output than the 3 brush that would had been on a CA  I'll sell it complete with the cultivators for $2000. It is ready to go to work and needs nothing. I got this tractor to use with a mid mount WOODS mower while I was rebuilding the engine in another CA and no longer need this one. The battery is only a few years old. I have replaced the bushings in the rear lift shaft and added grease fittings. It does not have lights although It is wired for the headlights.  ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Replies:
Posted By: PaulB
Date Posted: 21 Dec 2021 at 3:58pm
SOLD Thanks to all that were interested and messaged me, Especially to Chris who now has a "new to him" toy for Christmas  ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |