Need HELP with 200 allis chalmers
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18504
Printed Date: 07 Feb 2025 at 12:16am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Need HELP with 200 allis chalmers
Posted By: jjrpartin
Subject: Need HELP with 200 allis chalmers
Date Posted: 20 Sep 2010 at 2:52pm
|
I am new to this site and hate that my first post has to be to get help with a problem, but here goes... I have a 200 allis that i couldn't get the pto clutch to engage on. tried to see if i fixed that problem and couldn't get it to start. got that fixed and now when it is running it sounds like it is "grinding", but when i push the clutch in it stops the grinding and sounds wonderful, however, the pto still wont engage. any and all input would be greatly appreciated.
|
Replies:
Posted By: Big Hunter
Date Posted: 20 Sep 2010 at 3:51pm
|
Not sure if yours has a hydraulic clutch or is a "pull the lever" (or push the lever, I can't remember) and a coupler slides onto the pto shaft to engage it or not. If it's the coupler, it sounds like it is not sliding onto the pto shaft...the coupler must be right on the end of the pto shaft and grinding the splines to death. When you pull, or push the lever to engage the pto it should be going into a detent when engaged.
|
Posted By: jjrpartin
Date Posted: 20 Sep 2010 at 4:05pm
|
i did the pto shaft coupler. it is on and fine. the pto still doesnt want to engage, it just grinds. and in low gear it grinds. only in high gear with pto out it doesn't grind, but pto still wont engage. thank you for your input!!!!!
|
Posted By: Big Hunter
Date Posted: 20 Sep 2010 at 6:36pm
|
you are pushing the clutch in and waiting for everything to stop turning aren't you
|
|