Barn Door Needs Adjusting
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=185012
Printed Date: 30 Oct 2025 at 11:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Barn Door Needs Adjusting
Posted By: Dick L
Subject: Barn Door Needs Adjusting
Date Posted: 08 Dec 2021 at 1:11pm
|
Not sure I am up to it this winter https://www.youtube.com/watch?v=6jpXEB6r8xg" rel="nofollow - https://www.youtube.com/watch?v=6jpXEB6r8xg
|
Replies:
Posted By: DiyDave
Date Posted: 08 Dec 2021 at 6:07pm
You might be able to take a crow bar and raise it up enough to take the weight off of the affected roller. Unfortunately most all of them rollers require some ladder work, to adjust... Good Luck! ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: Dick L
Date Posted: 08 Dec 2021 at 6:35pm
I took a video and looked it over from my chair and I could see the lock nut on the hanger bolt. I'll probly set up the scaffolding. https://www.youtube.com/watch?v=n2RHPKZ8xgk" rel="nofollow - https://www.youtube.com/watch?v=n2RHPKZ8xgk
|
DiyDave wrote:Posted By: Ted J
Date Posted: 09 Dec 2021 at 1:03am
|
Haven't you got some high school kids that live close by who would like to do you a favor? It sure wouldn't take them long. I'd come do it if I was closer! ------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Posted By: DiyDave
Date Posted: 09 Dec 2021 at 4:36am
|
If I remember right, there is a flat spot, on the threads of the hanger, and a nut below the roller wheels, tighten the nut while holding the bolt... Don't remember the sizes, unfortunately... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: Dick L
Date Posted: 09 Dec 2021 at 6:34am
That is the way it works. I have it shut and with enough effort can slide it open and closed. After I put more thought into it I think I can pry the door up and put a block under it to where I can adjust it. I kept it closed all last winter. Mainly because I had lumber stacked in front as well as the saw.
|