Farm Equipment - D15 Industrial looking for help with V belt.

Print Page | Close Window

D15 Industrial looking for help with V belt.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=184938
Printed Date: 24 Aug 2025 at 7:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D15 Industrial looking for help with V belt.

Posted By: ster1
Subject: D15 Industrial looking for help with V belt.
Date Posted: 04 Dec 2021 at 2:43pm

Hi folks,
I have a D15 industrial gasser series 1. I’m trying to change the V belt and I’m banging my head against the wall. It looks like all I should have to do is remove the 4 bolts that secure the hydraulic pump flange, and slide the flange forward on the splined shaft a bit, and that should give me enough room to put the V belt on. Right? I got 4 nuts off, and the flange seems to have some play in it, but I can’t get it to move. I don’t see a set screw either. What am I missing? Thanks for your help :)

Replies:

Posted By: ster1
Date Posted: 04 Dec 2021 at 4:07pm

Never mind, I got it. I took the front frame off and slid the hydraulic pump forward. I didn’t need to take the 4 bolts out; in fact, I really shouldn’t have. Anyhow, Vbelt installed!

Posted By: jaybmiller
Date Posted: 04 Dec 2021 at 5:39pm

sounds a LOT easier than changing the fanbelt on my forklift !

step 1, unbolt 300# weight to gain ACCESS to the pump....

step 2, locate the MC hoist toslide the 400# weight out of the way

step 3, take a well deserved break BEFORE the back goes waaaaay out.

.....

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water