WTB 210/220 front engine plate
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=184825
Printed Date: 02 May 2025 at 2:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WTB 210/220 front engine plate
Posted By: injpumpEd
Subject: WTB 210/220 front engine plate
Date Posted: 27 Nov 2021 at 4:15pm
|
Looking for a front engine plate for a 210/220 in good shape. Prefer a stock original one, but will consider one that's been modified for different pump or? I already have other plates, just need one specifically for a 210/220. Thanks! PM here is best.
------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Replies:
Posted By: SteveM C/IL
Date Posted: 27 Nov 2021 at 8:24pm
| Probably getting scarce? |
Posted By: pirlbeck
Date Posted: 27 Nov 2021 at 10:39pm
|
Is 74027638 the part number? This is the plate that goes between the block and the timing cover and has the flanges on both side for the 2 bolts on each side that bolt to the side frames and support the front of the engine. These places all show at least one. Rock Valley Tractor Parts
All States AG Parts, Inc - Downing, WI
Mike's Equipment CO.
800-451-5240 Myerstown, PA 17067 |
|||||||||||||||
Posted By: injpumpEd
Date Posted: 28 Nov 2021 at 10:08am
|
Thanks, just wanted to check with our members first, I know they are around. That is the part and part number. An original one won't have the 7, just will be marked 4027638. Thanks! ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Posted By: d17brown
Date Posted: 28 Nov 2021 at 4:59pm
|
I think I have one ------------- phil |
Posted By: Calvin Schmidt
Date Posted: 28 Nov 2021 at 8:19pm
  This is what I did to install a "On Highway" engine into a 220. Luckily had a cover plate to install the hydraulic pump ------------- Nothing is impossible if it is properly financed |
Posted By: injpumpEd
Date Posted: 29 Nov 2021 at 7:34am
|
I already know how to make others work. I am needing an original one to mock up new frame rails, and want the same as what I currently have on my engine, as I don't plan on tearing the engine down once my new frame is built. I have a lot of work into this front plate to fit my P pump, so would like to make the new frame accommodate my engine as it sits. Phil is so close, and I'm currently working on a fuel system for him, so that is the kind of response I was looking for. It is different than the D21. Thanks everyone!
------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |