Farm Equipment - What size chisel plow size for a 200

Print Page | Close Window

What size chisel plow size for a 200

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=184821
Printed Date: 23 Oct 2025 at 8:33pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: What size chisel plow size for a 200

Posted By: 72AC200
Subject: What size chisel plow size for a 200
Date Posted: 27 Nov 2021 at 8:37am

I have been thinking about getting a chisel plow for my 200. I want to go with a three-point. Are they any good but I am open to pull type. I'm in Northwest Ohio. I have duals, full set of front weights and in fluid in the back tires. I have medium to heavy ground with some clay. I don't know much about chisel plow any info would help thanks.

Replies:

Posted By: bigal121892
Date Posted: 27 Nov 2021 at 8:43am

You should be able to pull a 12' chisel plow, I would get a 3 point, this way you can use the traction booster.

Posted By: DougG
Date Posted: 27 Nov 2021 at 8:58am

Chisel plows are gauged more on shank than feet, 7 shank should work but i wouldnt go more, as Allis said you have to be going 5 mph or faster to utalize the tractor and not abuse it - of coarse - soil type- hills- etc are all a factor- 200,s are fun doing chisel work

Posted By: modirt
Date Posted: 27 Nov 2021 at 10:40am

I have a 9 shank 3 point mounted Landoll I'd sell for $500, which is what I paid for it. About 10 feet wide.

Bought it for the tool bar and was going to mount raised bed disks on it but too big for my tractor and gates. Took off the outside pair of shanks to make it 7 shanks in the ground. In our soils with clay hard pan, 70 hp tractor could pull it to a depth of a few inches, but lacking duels or FWD, any deeper and my tires just spin out.