How many of these are still out there
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18475
Printed Date: 07 Feb 2025 at 12:03am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: How many of these are still out there
Posted By: mark-east-tn
Subject: How many of these are still out there
Date Posted: 19 Sep 2010 at 7:53pm
Here is a picture of my 172 A-C mower, its not a real good picture but I got one the other day when it was behind my 19. Just wonderd how hard it is to get blades for. Mower does a great job it mowes like a finish mower. 
|
Replies:
Posted By: Luke R.
Date Posted: 19 Sep 2010 at 7:58pm
|
We have two of them here in Iowa. ------------- 4-7030's,170G,220FWA,3-220's,210,D21II,D21I industrial,2-200's,3-190's,175D,2-D19D's,D19G,WD45,WD,CA,2-UCont.,5015FWA,917,B110,Gleaner F |
Posted By: Ryan Renko
Date Posted: 19 Sep 2010 at 8:24pm
| I have one in southern Illinois. I have the laminated tires and it was originally a hand crank for the height. We did away with that and put a cylinder on it. Always shedded and mows great!! Ryan |
Posted By: Brian Jasper co. Ia
Date Posted: 19 Sep 2010 at 8:26pm
|
I have a 160 snap coupler mower, very similar to that one. ------------- "Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford |
Posted By: Skyhighballoon(MO)
Date Posted: 19 Sep 2010 at 8:51pm
|
I bought a 172 earlier this year from Michael Crowe - has the original hand ratchet adjuster on one side I use to set minimum height then I put an Allis one-way cylinder on the other side to raise it. Run it behind my Series III D17. Works great and as said it leaves a much nicer cut than a brush hog. Blades are still available thru AGCO I understand...I hear they are higher priced but much better blades. Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Posted By: Dave (NE)
Date Posted: 19 Sep 2010 at 8:58pm
| I have one in eastern Nebraska. Dave |
Posted By: Don M SEIA
Date Posted: 19 Sep 2010 at 8:59pm
| We have a 160 3 point, we are rebuilding. One owner bought in 1963. Don |
Posted By: dustinmo
Date Posted: 19 Sep 2010 at 9:05pm
| I have 2 of the trail type 5 footers and a 6 foot 3pt one and my oldman has a 6 footer 3pt |
Posted By: StewartMD
Date Posted: 19 Sep 2010 at 9:07pm
|
We have one. Works great behind the CA, WD, or D-17. ------------- 8030, 8010, 220, 185, 160, D-17, WD, Unstyled WC, CA, G, 20-35, Gleaner E |
Posted By: Luke R.
Date Posted: 19 Sep 2010 at 9:17pm
Here is one of ours, its in like new condition. Sorry about the big pic size i cant figure out how to make it smaller.
------------- 4-7030's,170G,220FWA,3-220's,210,D21II,D21I industrial,2-200's,3-190's,175D,2-D19D's,D19G,WD45,WD,CA,2-UCont.,5015FWA,917,B110,Gleaner F |