allis grain drill
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=184587
Printed Date: 01 Aug 2025 at 6:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: allis grain drill
Posted By: holthauskieran
Subject: allis grain drill
Date Posted: 14 Nov 2021 at 11:36am
| rear wheel sprocket for snap coupler mounted drill . bolts on rear axel to drive drill. 100. 00 plus ship. 785-410-0777 |
Replies:
Posted By: PaulB
Date Posted: 14 Nov 2021 at 11:59am
|
What is the tooth count? For WD or CA or maybe even 8N? Does that include the mounting plate and special wheel studs? ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: holthauskieran
Date Posted: 14 Nov 2021 at 2:02pm
| it is a 24 tooth sprocket with wd or ca-c holes , can send pics -cell phone |
Posted By: PaulB
Date Posted: 14 Nov 2021 at 3:07pm
|
24 tooth sprocket is for at Side dresser/front mounted planter. An All crop drill will use a 12 tooth sprocket on a CA, a 14 tooth on a WD/WD45 and 13 tooth sprocket if it has a 3pt to be used with an 8N. This is what the CA All -Crop-Drill sprocket looks like.  ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: holthauskieran
Date Posted: 14 Nov 2021 at 3:13pm
| that must be what i have. my bad. thanks |
Posted By: PaulB
Date Posted: 14 Nov 2021 at 3:30pm
|
Is your 24 tooth gear a single piece or is it 2 pieces bolted together? The single gear is for the B & C tractors, the 2 piece gear is the CA gear and would need 2 complete gears to drive both sides. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: holthauskieran
Date Posted: 14 Nov 2021 at 4:08pm
| mine is one peice. i have two of those. thanks kieran |
Posted By: BobPaulusCentrOH
Date Posted: 04 Feb 2023 at 4:34pm
|
Thanks to Paul B for answering the question. I have been looking high and low for drive gear for the CA mounted grain drill. Appreciate the photo. Thanks, Bob
|
Posted By: Mikez
Date Posted: 04 Feb 2023 at 6:21pm
| What’s the part number |