were do i hook up my 80 sickle bar mower?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=184020
Printed Date: 07 Apr 2026 at 11:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: were do i hook up my 80 sickle bar mower?
Posted By: mike 44
Subject: were do i hook up my 80 sickle bar mower?
Date Posted: 19 Oct 2021 at 6:35pm
  
|
Replies:
Posted By: mike 44
Date Posted: 19 Oct 2021 at 6:36pm
| this is not like the old d17 I had |
Posted By: allisbred
Date Posted: 19 Oct 2021 at 7:19pm
| S or R? |
Posted By: Gary
Date Posted: 19 Oct 2021 at 7:30pm
|
I don't know of any 80 Series that attached to Snap Coupler. The No. 7 did though. https://www.ebay.ca/itm/284205056163?epid=17045508334&hash=item422bf100a3:g:nj0AAOSwXbNgPt~-" rel="nofollow - https://www.ebay.ca/itm/284205056163?epid=17045508334&hash=item422bf100a3:g:nj0AAOSwXbNgPt~- |
Posted By: mike 44
Date Posted: 19 Oct 2021 at 7:35pm
|
r ... the thing hooked up in pic is my sc blade i have the piece that hooks to tractor just dosent look like my old d17 under there |
Posted By: Mikez
Date Posted: 19 Oct 2021 at 7:50pm
| look in the parts book. Shows the brackets needed. Hangs off the pins where the draw bar hangs. And the balance spring, has like a C bracket that bolts around bottom of axle. |
Posted By: Mikez
Date Posted: 19 Oct 2021 at 7:53pm
| well the pictures shown is missing the brackets |
Posted By: mike 44
Date Posted: 19 Oct 2021 at 8:48pm
|
yea my drawbar/3pt set up is diff than theone i had before no were to hang the piece to hook mower too |
Posted By: MACK
Date Posted: 19 Oct 2021 at 8:56pm
| Your tractor is missing the drawbar brackets where the mower bracket mounts. MACK |
Posted By: mike 44
Date Posted: 19 Oct 2021 at 9:37pm
|
those available? |
Posted By: Mikez
Date Posted: 20 Oct 2021 at 8:17am
|
I think a&w tractor had them in his ad in old allis new. What mower do you have. 80R or 80R3.
|
Posted By: Gary
Date Posted: 20 Oct 2021 at 4:17pm
|
80R3 wouldn't need the drawbar brackets, but would need a 3 pt hitch. G |
Posted By: Mikez
Date Posted: 20 Oct 2021 at 9:43pm
|
Gary I know that. I just was confused with the statement that it doesn’t look like his old D17 under there, and the drawbar/3pt set up is dif then the one he had b4. The pictured tractor looks just our 57 D17 minus the drawbar brackets
|
Posted By: mike 44
Date Posted: 20 Oct 2021 at 10:40pm
|
its a r... mikez you dont have anything? |
Posted By: PaulB
Date Posted: 21 Oct 2021 at 6:21am
|
OP should have an operators manual for his mower. Then he would have known what brackets he needs and what is missing from his tractor. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: darrel in ND
Date Posted: 22 Oct 2021 at 9:43am
| The brackets that you are missing are tractor related, not mower related (even though your mower bracket does attach to them). So I would head to a salvage yard to find them. The draw bar bail attaches to the missing brackets as well. Darrel |
Posted By: Mikez
Date Posted: 22 Oct 2021 at 4:58pm
|
.227741 and 227739. No we don’t have any available.
|