wd 45 three disc clutch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=183991
Printed Date: 17 Sep 2025 at 11:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: wd 45 three disc clutch
Posted By: HudCo
Subject: wd 45 three disc clutch
Date Posted: 18 Oct 2021 at 1:01pm
| looks like most of the parts are nos, mine is really shot all the the shims are gone discs are really thin so i am sure the seperator plates and presure plates are shot, so i will need to start sorceing out some parts its a 1955 and had a f11 pto driven loader on since it was new so it has had a very high amount of hand clutch use. any vendors on here have parts thanks Hud. |
Replies:
Posted By: Rltool
Date Posted: 18 Oct 2021 at 6:27pm
| Rick Corder may still have some parts left. |
Posted By: Bill_MN
Date Posted: 18 Oct 2021 at 6:33pm
|
DJS sells the discs and plates new. ------------- 1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow |
Posted By: HudCo
Date Posted: 18 Oct 2021 at 8:09pm
| how do you get a hold of these folks |
Posted By: Sugarmaker
Date Posted: 19 Oct 2021 at 6:28am
|
One of the sponsors Sandy Lake Implement may have new and or used parts also. They had at least one hand clutch assembly, but that was a couple years ago. Call Brenda. Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet. |
Posted By: Lon(MN)
Date Posted: 19 Oct 2021 at 6:56am
| I have piles of hand clutch parts I would sell. email me at lselkriver@gmail.com if you are interested. |
Posted By: Bill_MN
Date Posted: 19 Oct 2021 at 7:49am
------------- 1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow |
HudCo wrote:Posted By: HudCo
Date Posted: 19 Oct 2021 at 9:33am
| thanks for the input , burly tractor in idaho may have a used assembly then i will just need to get discs and plates seals and gaskets should be good for an other 50 years |