Farm Equipment - 1984 n6 straw chopper?

Print Page | Close Window

1984 n6 straw chopper?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=183891
Printed Date: 27 Oct 2025 at 8:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 1984 n6 straw chopper?

Posted By: bleeds orange
Subject: 1984 n6 straw chopper?
Date Posted: 13 Oct 2021 at 8:37pm

I recently purchased a 1984 n6 and iam getting it set for corn and was reading where it says to get straw chopper pulleys set a certain way. The biggest problem is on the same sticker on the box where straw chopper is it says to "fully retract concave"? I don't know what to do, and the operators manual is no help.

Thanks cory

Replies:

Posted By: JimWenigOH
Date Posted: 13 Oct 2021 at 9:07pm

Cory,

If it's like my K2, the concaves on the chopper will pivot down and out of the chopper so they are not being used. Only the hammers will be hitting the material as it goes through the chopper. Good luck with your new machine.

Jim