wheel spacing
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18376
Printed Date: 06 Feb 2025 at 9:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: wheel spacing
Posted By: Chris WI
Subject: wheel spacing
Date Posted: 17 Sep 2010 at 4:51pm
|
What is the correct wheel spacing for a 4-16 allis snap coupler plow I think it is a 74 or an 84. it has trip beams. I am setting up my d-19 again for plowing. I asked this question last year about this time, but I can not remember.
|
Replies:
Posted By: Eldon (WA)
Date Posted: 17 Sep 2010 at 10:05pm
I believe with any snap coupler plow you want the furrow wheel set all the way in.
-------------
ALLIS EXPRESS!
This year:
|
Posted By: Clay
Date Posted: 17 Sep 2010 at 11:31pm
We set our 180 and D-17 out. D-17 pulls a 4-16 AC#74 plow.
180 pulls a 4-16 AC 2000 plow.
|
Posted By: JoeO(CMO)
Date Posted: 18 Sep 2010 at 8:21am
I looked in a plow manual at a chart....a 4-16 plow should have a wheel spacing of 27-28 inches measured from center of tractor to the inside wall of furrow tire.
-------------
|
Posted By: Skyhighballoon(MO)
Date Posted: 18 Sep 2010 at 9:04am
Eldon with 3 bottom plows the right tire is set in, with 4 bottoms it's set out. The way a 4 bottom is arranged on the frame the inside bottom sets out to the right. Mike
-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers
|
Posted By: Eldon (WA)
Date Posted: 18 Sep 2010 at 10:42am
Oops...guess you can tell that I have only pulled the 2 and 3 bottom plows. I would think that if in doubt you could eyeball the end of the lay and just make sure it is in line with the inside of the tire or better.
-------------
ALLIS EXPRESS!
This year:
|
|