Construction and other equipment - carb kit for a gas 2200 on an h 4 allsis crawler

Print Page | Close Window

carb kit for a gas 2200 on an h 4 allsis crawler

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=183714
Printed Date: 15 May 2025 at 9:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: carb kit for a gas 2200 on an h 4 allsis crawler

Posted By: pinball
Subject: carb kit for a gas 2200 on an h 4 allsis crawler
Date Posted: 06 Oct 2021 at 11:59am

so my Allis H- 4 started running bad. it has the 2200 gas motor. I pulled the carb off and took it all apart to clean. it says zenith on the carb and I haven't found any numbers. so I need a kit for it. I've found some om eBay with what looks to be the right bowl gasket but none say for an Allis h4. anyone know the right number i need to look for or where you might have bought one before. any info is appreciated. thanks for reading.

Replies:

Posted By: orangeman
Date Posted: 07 Oct 2021 at 9:01am

Pinball: have you tried reaching out to The Carburetor Shop LLC in Missouri?

https://www.thecarburetorshop.com/" rel="nofollow - https://www.thecarburetorshop.com/

Posted By: steve(ill)
Date Posted: 07 Oct 2021 at 9:35am

motor.................... carb........... carb # ......................... kit

G-2200

Z 267

13044 (4020322-2)

https://carburetor.ca/kits/ck0945.html" rel="nofollow - CK945

-------------
Like them all, but love the "B"s.

Posted By: orangeman
Date Posted: 07 Oct 2021 at 9:41am

Adding to Steve(Ill) information - AC H-4 parts book shows Gasoline Carburetor Repair kit for H-4 Gas Crawler as Part Number 4056411. Excerpted from page 193 Form 1012402 Reprinted 11-1975 replaces form TP-104.

Also - see Zenith information here:

http://www.zenithfuelsystems.com/downdraft_228.htm" rel="nofollow - http://www.zenithfuelsystems.com/downdraft_228.htm Might work if no kit available.

HTH's - Orangeman

Posted By: pinball
Date Posted: 07 Oct 2021 at 4:08pm

Thanks for the info.