H3 pto
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=183540
Printed Date: 28 Nov 2024 at 12:50am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: H3 pto
Posted By: elec
Subject: H3 pto
Date Posted: 28 Sep 2021 at 6:35pm
|
I have an H3 with a pto. Was told that in d15 with shuttle the pto is not the right speed. My h3 dozer has a shuttle, so does the pto run at the right speed (540)? Would like to run a pull type brush hog with it. |
Replies:
Posted By: DiyDave
Date Posted: 28 Sep 2021 at 7:01pm
Rev it up and put a tach on the pto shaft.. ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: Beam
Date Posted: 28 Sep 2021 at 8:38pm
|
The manual states it will run at 540 at around 1650 rpm (I don’t have access to it now to get exact RPM) regardless of gear. I’m going to add the tach on mine in order to ensure mine runs at 540. ------------- 1962 H3, WD45, B210 |
Posted By: DonBC
Date Posted: 30 Sep 2021 at 3:58pm
|
I borrowed a H3 with a pto and I used a 6' bush hog type mower with it with no problems. I also had a H3 LB and with no pto. I installed a hydraulic motor on the bush hog and used the hydraulics for the backhoe to drive it and it worked well also. ------------- Jack of all trades, master of none |
Posted By: Calvin Schmidt
Date Posted: 19 Oct 2021 at 7:58pm
|
H-3 PTO has a gear box at the rear which corrects the PTO to standard 540 when equipped with the shuttle. D-15, I-60/600/615 does not so has non standard PTO speeds ------------- Nothing is impossible if it is properly financed |
Posted By: Fred in Pa
Date Posted: 10 Nov 2021 at 11:18am
This is what's on my HD 3 , let's say if a guy had a extra unit what would a good working PTO Unit be worth . ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |