Farm Equipment - 7050 rear axle needed

Print Page | Close Window

7050 rear axle needed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18329
Printed Date: 07 Feb 2025 at 12:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7050 rear axle needed

Posted By: Lonn
Subject: 7050 rear axle needed
Date Posted: 16 Sep 2010 at 3:54pm

OK, my 7050 has extended axles and had axle mount duals on it when I bought it and the previous owner ran it with one loose hub and ruined both the hub and the axle. Anybody know a source for a good used axle and also dual hub? What other model tractors might work? Thanks. Lonn

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Replies:

Posted By: Troy
Date Posted: 16 Sep 2010 at 7:47pm

Lonn i would have a 7580 with long axles i do not know if they are the same size but i can check and see, also have a hub for it also,

Posted By: Lonn
Date Posted: 17 Sep 2010 at 6:09am

Thanks Troy. If had to bet it would be that they are a bigger and maybe longer axle. I'll have to go measure my axle diameter. I think they are 3 5/8" off the top of my head.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: Lonn
Date Posted: 19 Sep 2010 at 8:23am

Troy, they are 3 5/8".

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: acer
Date Posted: 19 Sep 2010 at 11:08am

Lonn i have a rear diff. and range transmission ffom a 7060 ps. i can pull an axle if needed and i think i have a dual hub but need to check on that what is length of axle from final drive to end of axle? im in north central mo.

Posted By: Kevin in WA
Date Posted: 19 Sep 2010 at 12:09pm

7580 axle housing is shorter, I think 7050 is the only one that used the 3 5/8 axle in the long housing, 7045 , 7060 ect. had 3 3/4 or 4" You could use the assembly from one of those tractors. Pretty sure the 3 5/8 axles had a different seal and wear sleeve setup.