What's wrong with this picture? Help please
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18312
Printed Date: 06 Feb 2025 at 9:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: What's wrong with this picture? Help please
Posted By: ibleedorange
Subject: What's wrong with this picture? Help please
Date Posted: 16 Sep 2010 at 5:20am
 Bad day. This is the second time the left side steering arm has broken. AGCO says sorry, the parts are obsolete. I have a new right side steering arm, but no bushings. Haven't been able to find a left side anywhere. Any help would be appreciated. Drawing & part numbers are below. Thanks  ------------- Tractors; If it runs, use it. Motorcycles: Ride em like today is your last day. |
Replies:
Posted By: ibleedorange
Date Posted: 16 Sep 2010 at 5:22am
|
Sorry, it's a White 2-75 ------------- Tractors; If it runs, use it. Motorcycles: Ride em like today is your last day. |
Posted By: Bob D. (La)
Date Posted: 16 Sep 2010 at 5:28am
|
But the brakes are good. LOL Sorry, know it isn't funny, but it does look like it stops quite well.God Bless. ------------- When you find yourself in a hole,PUT DOWN THE SHOVEL!!! |
Posted By: Larry(OH)
Date Posted: 16 Sep 2010 at 6:02am
|
Try maibach tractor in Sterling OH 330-939-4192. He has alot of that kind of stuff PLUS has alot of contacts in our area for guys who may be able to help. ------------- '40 WC puller,'50 WD puller,'50 M puller '65 770 Ollie *ALLIS EXPRESS contact* I can explain it to you, BUT I cannot understand it for you!! |
Posted By: Andrew(southernIL)
Date Posted: 16 Sep 2010 at 6:35am
|
Looks like the independent front end suspension works great.....lol. Well at least you have flat ground to work on; something similar happened to my neighbor twice last year and both times was where no truck could go.
------------- If fishing is a sport your looking at an athlete |
Posted By: Lonn
Date Posted: 16 Sep 2010 at 6:45am
|
Looks like it's got to go whiz real bad! ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: ACJohn
Date Posted: 16 Sep 2010 at 6:49am
| That's how I learned to downhill ski!! |
Posted By: TexasAllis
Date Posted: 16 Sep 2010 at 7:24am
| Any chance an automotive tie rod will work? |
Posted By: farmtoybuilder
Date Posted: 16 Sep 2010 at 7:32am
|
Bushings you can make or have made for you. And same for arm Make out of steel instead of cast? If they are prone to breaking I would be beefing them up.
Make sure the tie rods and steering stops are set correctly. http://www.nationalbronze.com/contact.php - http://www.nationalbronze.com/contact.php ------------- 5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them. |
Posted By: JohnCO
Date Posted: 16 Sep 2010 at 10:14am
|
Too much toe in?
------------- "If at first you don't succeed, get a bigger hammer" Allis Express participant |
Posted By: Gerald J.
Date Posted: 16 Sep 2010 at 10:42am
|
I'd take the broken arm to a welding/machine shop and ask for it to be replicated in welded steel a little thicker than the casting. Unfortunately, its not just the steering arm, its the top pivot for the king pin effectively for the hub assembly. Forcing the tractor to move with it broken can easily break the bottom of item 1 or 11 and then you have a real mess. Gerald J. |
Posted By: ac45
Date Posted: 16 Sep 2010 at 12:37pm
| I'd weld the one back that you have, pre heat it and use a good nickel steel alloy rod. That will get u going but it may break again |
Posted By: ToddSin NY
Date Posted: 16 Sep 2010 at 1:12pm
| I thought he was trying to get 1 more furrow plowed! |
Posted By: Larry in OK
Date Posted: 16 Sep 2010 at 4:45pm
|
Maybe some corrective orthopedic tires might help?
Worst case of pigeon tires I've ever seen.
------------- Some people are like Slinkies. Not really good for much of anything but they still bring a smile to your face when you push them down a flight of stairs. |
Posted By: Gary in da UP
Date Posted: 16 Sep 2010 at 5:24pm
| Did White build that tractor or is it a Fiat , etc. ? there has to to parts out "there" somewhere. I can't beleive it would be an orphan already. Good luck. |
Posted By: ibleedorange
Date Posted: 16 Sep 2010 at 5:40pm
|
It's an Iseki.........I think that's how it is spelled. ------------- Tractors; If it runs, use it. Motorcycles: Ride em like today is your last day. |
Posted By: Ed in TX
Date Posted: 16 Sep 2010 at 6:43pm
| The tires are gonna wear uneven |
Posted By: Mojo
Date Posted: 16 Sep 2010 at 6:50pm
|
ZedF were put on the American made Whites. Don't know about Isekis. Look for a cast ID with ZF on it somewhere. Others tractors used ZedF too, maybe Deere? Can't remember exactly.
Good luck mojo/Mike |
Posted By: Leon B MO
Date Posted: 16 Sep 2010 at 7:51pm
|
Man, tuff crowd, tuff crowd!!! Yes all comments are good and got me laughing but this poor guy needs his tractor. May take the weights off the front if you can, that will help abit for the new piece.
Good luck,
Leon B MO ------------- Uncle always said "Fill the back of the shovel and the front will take care of itself". |
Posted By: Eugene
Date Posted: 17 Sep 2010 at 5:53am
| Definately ISEKI. Looks similar to an SX95 or 9000 model. What horsepower is your tractor. That might help identify it. |
Posted By: ibleedorange
Date Posted: 17 Sep 2010 at 7:43am
|
My tractor is 75HP. Thanks for the humor, I need it.
------------- Tractors; If it runs, use it. Motorcycles: Ride em like today is your last day. |
Posted By: Steve Bright
Date Posted: 17 Sep 2010 at 8:06am
| Reminds me of the story about the farmer who lost his a** and doesn't know which way to turn |
Posted By: Brian Jasper co. Ia
Date Posted: 17 Sep 2010 at 11:24am
|
No Oliver in that one? Wouldn't that be about a 1655 size? Some of the Whites were pretty much Oliver with new tin on them weren't they? ------------- "Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford |
Posted By: Eugene
Date Posted: 17 Sep 2010 at 5:36pm
| I would say that if you can find an Iseki dealer you could ask for a 7000 parts manual. I am 90 percent sure that a 9000 model is also the same. Should be able to find them at a Salvage yard I guess. |
Posted By: AllisFreak MN
Date Posted: 17 Sep 2010 at 5:55pm
|
Looks like it had a wheel alignment done by Agco's management team. ------------- '49 A-C WD, '51 A-C WD, '63 A-C D17 Series III, 1968 A-C One-Seventy, '82 A-C 6060, '75 A-C 7040, A-C #3 sickle mower, 2 A-C 701 wagons, '78 Gleaner M2 |
Posted By: CJohnS MI
Date Posted: 17 Sep 2010 at 6:33pm
I Googled, but apparently, that model Iseki with IFS (independent front steering) is rare. However, they do make a model with DFS (detachable front steering): I'm sure you'll locate the parts. But the question that begs to be answered is: Why has the lft busted twice, but the right not? If you replace the busted upper parts, the lower parts may be damaged and hastening the uppers going out. |