Farm Equipment - Wd cam timing advance

Print Page | Close Window

Wd cam timing advance

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=182589
Printed Date: 25 Aug 2025 at 6:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Wd cam timing advance

Posted By: bobutzinger
Subject: Wd cam timing advance
Date Posted: 17 Aug 2021 at 10:50pm

Built a pulling motor and put in a cam done by a gentleman named Barney in northern Ohio before he died. Was told by a fellow puller running the same to advance the cam one tooth. Anybody done this or know any info? Thanks Bob

-------------
B,B with snap co,2-C,CA,WC FLAT TOP,WC,ED 40,2-WD,2-WD45,2-WD45D,D10,D12,D14,D15,D15II, D17,D17D-S1,D17D-S3,D17IV,D19D,180,185,190Xt III,200,7000,7010,7030,2-7060,7060PS-Cummins,7080,K2D,F2D,F3D,2-M2D

Replies:

Posted By: Ed (Ont)
Date Posted: 18 Aug 2021 at 6:35am

Try posting on the pulling forum as well.