Restoring an old hd4
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=182353
Printed Date: 23 Aug 2025 at 7:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Restoring an old hd4
Posted By: Foobarbigtime
Subject: Restoring an old hd4
Date Posted: 07 Aug 2021 at 3:48pm
Good afternoon,. Thanks for the add!
I'm looking for a list of parts for my old hd4 and I'm not having much luck. Anyone have any ideas on how to get the following list of parts?
2 x 232727 Spacer
2 x 229113 Snap ring
4 x 227598 Snap ring
4 x 237929 Shim
2 x 235440 cup
2 x 235439 bearing
2 x 0923584-1 O-ring
2 x 244787 Spacer
2 x 22584 cup
2 x 4251113-5 bearing
2 x 239238 seal
2 x 0237047-6 seal
2 x 1003749-7 Banne Assembly
2 x 0254685-1 Clutch assembly
2 x 225152 pin lock
1 x 233246 Rear cover gasket
2 x 1003344-7 oil seal
2 x 0606897-7 bearing
2 x 209897 bearing
2 x 227678 cup bearing
2 x 222214 cone bearing
2 x 0923584-7 seal cap
2 x 218648 shim
2 x 237929 shim
2 x 247874 gasket pan
2 x 0252653-1 shaft
2 x 233893 bearing
4 x 233906 clip
Thanks ahead.
|
Replies:
Posted By: Coke-in-MN
Date Posted: 07 Aug 2021 at 11:04pm
|
All those bearing and seals should be found at a bearing supplier - standard industry parts . Other items could be harder but MinPar might have some or old AC dealer might be able to locate
-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.
|
Posted By: HD6 Merv
Date Posted: 07 Aug 2021 at 11:43pm
All Allis numbers need a 7 in front of them. And need to be 8 digits long
-------------
tits tyres and tracks
they all cost you money
|
Posted By: gemdozer
Date Posted: 08 Aug 2021 at 2:56pm
|
I am still have the 2 shafts 0252653-1
|
Posted By: Foobarbigtime
Date Posted: 08 Aug 2021 at 6:16pm
|
I picked up a parts manual from a&I and all the parts are like I listed. Would you ship the shafts to Canada? How much would you want for them?
|
|