Farm Equipment - 180 diesel engine oil dipstick

Print Page | Close Window

180 diesel engine oil dipstick

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=182057
Printed Date: 27 Apr 2024 at 11:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 180 diesel engine oil dipstick

Posted By: edmo
Subject: 180 diesel engine oil dipstick
Date Posted: 26 Jul 2021 at 3:57pm

I recently bought a 180 with a diesel engine and just changed the engine oil and filter. According to my op. manual that should require 12 quarts. So I filled to top of dipstick, ran the engine a bit, then added another quart. It reads full, but it only took a total of 9 quarts. I assume dipstick is accurate, but don't know; or if someone might have replaced it with a wrong one at sometime. Can anyone give me the length of the dipstick from the stop cap to the tip?

Also, it may have changed during the Model 180's length of production, but the manual shows the dipstick, filler plug, and filter all on the left side. On mine the dipstick is on the right.

Replies:

Posted By: Boss Man
Date Posted: 26 Jul 2021 at 4:00pm

There was a post not long ago about an early and late. Later ones had a bigger pan and held more oil.

Posted By: Alvin M
Date Posted: 26 Jul 2021 at 5:12pm

need engine s# and dip stick part# then i can tell if it is the right one or what # it takes

Posted By: DrAllis
Date Posted: 26 Jul 2021 at 8:04pm

A right-hand dipstick on a 180 diesel ?? Sounds to me like a combine engine transplant and who knows what/which oil pan is on it ??

Posted By: SteveM C/IL
Date Posted: 26 Jul 2021 at 10:18pm

8070 op man says 21qt with all three filters. That's what I put in it and it reads as far above "full stopped" as it is between add and "full stopped". Yes after extended run time. It's still a long way to the crank so I guess it doesn't matter. Dip stick reaches to end of tube in pan.

Posted By: edmo
Date Posted: 28 Jul 2021 at 1:31pm

Thanks, Alvin. The engine is a model 2800, serial num. 20102994. The right side dipstick is a 4023860. What I got?