Classifieds - Looking for 46" sickle bar

Print Page | Close Window

Looking for 46" sickle bar

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=181681
Printed Date: 28 Dec 2024 at 7:10pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Looking for 46" sickle bar

Posted By: Krazy Karl
Subject: Looking for 46" sickle bar
Date Posted: 09 Jul 2021 at 11:10pm

I'm looking for a NOS or used sickle bar. For. A 46 in sickle mower. Was using mine yesterday and broke the sickle. Looking for options

Replies:

Posted By: Ray54
Date Posted: 10 Jul 2021 at 12:18pm

To be on the same page, your talking the bar with sickle sections bolted or riveted on.

They are weldable. Works best to weld the piece on the end away from the driving head.

Also finding a longer knife (as 6,7,and 9 foot are much more common lengths) and shorting it to what is needed by your machine. The knife bar is almost universal across most brands, except for the section width. Just need to find the right width of sections to match the guard width on your machine. So start looking in old iron piles, it could even be from a combine header.

Posted By: Krazy Karl
Date Posted: 10 Jul 2021 at 2:49pm

Yes bar with sections. Was planning on welding it. Broke off where the drive bolts to the bar.
Just looking for a back up for future.

Posted By: dawntreader74
Date Posted: 12 Jul 2021 at 10:54pm

have one if still needed.