problems continue
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18123
Printed Date: 06 Feb 2025 at 12:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: problems continue
Posted By: wheatbreeder
Subject: problems continue
Date Posted: 12 Sep 2010 at 9:56am
|
We replaced the engine in our f2 with a used motor the new motor runs fine we drove it home from the dealership about 2 hrs and notice fluid coming out of the injector port or hole. Don't know if it is fuel or motor oil mechanic thinks that it is motor oil and suggestion as to problem
Morley
-------------
Farm stuff 8050,6690,175,F2,5050,WD
|
Replies:
Posted By: DrAllis
Date Posted: 12 Sep 2010 at 7:17pm
|
If it's motor oil, it's a leaking valve cover gasket. If it's fuel, it's a leaking injector body down inside the injector bore.
|
Posted By: wheatbreeder
Date Posted: 12 Sep 2010 at 7:24pm
|
Dr. Allis what ever is leaking is coming from the injector bore
-------------
Farm stuff 8050,6690,175,F2,5050,WD
|
Posted By: Amos
Date Posted: 12 Sep 2010 at 9:22pm
|
It most times is a leaky valve cover gasket. It could also be the injector as Dr says. I have thought that I had a loose fitting on the injector before but the valve cover gasket was leaking just behind and beside (two different tractors and a combine engine) the injector. Probably didn't show up until it was warmed up and I am sure whomever sold you the engine had washed it up clean for you. Try to tighten the valve cover hold down bolts. I have had them come loose and then leak. Sometimes tightening them up will stop it till they vibrate loose again.
|
Posted By: Steve M C/IL
Date Posted: 12 Sep 2010 at 9:30pm
|
More often than not this is a valve cover gasket which runs into the injector hole then on out.Check it out.
|
|