Gleaner N7 Question and Thank You
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18122
Printed Date: 06 Feb 2025 at 4:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Gleaner N7 Question and Thank You
Posted By: robbieallis
Subject: Gleaner N7 Question and Thank You
Date Posted: 12 Sep 2010 at 9:45am
|
I am looking at a Gleaner N7, 1979 combine. It is in fairly good shape. Was looking for advise and possible prices members thought might be good. I want to thank everyone for helping me with a lot of questions I have posted.
Rob
-------------
Allis 4ever
|
Replies:
Posted By: AndrewGubbels
Date Posted: 12 Sep 2010 at 1:08pm
The ones I have seen have been anywhere from $6000 to $15000 for an excellent one. THings to look for that is common points of wear. Feeder house chains upper and lower. Check the clean grain and tailings elevators for worn through spots and bad chains. Check all the augers and grain tank bottoms. Give the belts a looking over. Also Just take a look at the cage, and helicle bars and cylinder bars. Check for alot of wear and bent spots in the cage. Just look it over you can spend alot fast getting it back up into shape if it needs these. Good Luck!!
Andrew
-------------
Andrew Gubbels
Gubbels Restoration
|
Posted By: orebaugh
Date Posted: 12 Sep 2010 at 2:08pm
|
Cage sweep was a nightmare on ours. We replaced the open cylinder with a closed one. Doubled the helical bars (piggy backed them). New extened concave. New cage. Pryor to that, it was doggy in beans. After these improvments, a real bean eater. Good luck
|
Posted By: robbieallis
Date Posted: 12 Sep 2010 at 10:35pm
|
Thanks for all the wonderful advise, I really appreciate it!
Rob
-------------
Allis 4ever
|
|