Print Page | Close Window

3 bottom snap coupler roll over plow

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=181177
Printed Date: 17 Nov 2024 at 5:21pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 3 bottom snap coupler roll over plow
Posted By: ZachD89
Subject: 3 bottom snap coupler roll over plow
Date Posted: 13 Jun 2021 at 8:32pm
I found a 3 bottom snap coupler roll over plow a guy wants to sell. Looks to be 3 14s. My question is what tractor would you use to pull a 3 bottom roll over? And dose anyone else here have one of these plows? I can not find much on a 3 bottom roll over.


-------------
37 A,37 Waukesha B,35 WC,38 WF,M crawler,49 WF,49 WD,53 WD45,39 and 40 RC,47 WC,41 B,39 B,48G,48,C,59D10,D21,IB,B10,B12,B208,B1,Roto Bale Loader, sp100 combine, allcrop 66, L3 Gleaner



Replies:
Posted By: DiyDave
Date Posted: 13 Jun 2021 at 8:51pm
A 3-14 rollover is pretty heavy.  I would say a D-17 would certainly handle it.

-------------
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!


Posted By: ZachD89
Date Posted: 13 Jun 2021 at 8:55pm
I was thinking a D17 or D19. That’s a good bit of weight hanging off the back

-------------
37 A,37 Waukesha B,35 WC,38 WF,M crawler,49 WF,49 WD,53 WD45,39 and 40 RC,47 WC,41 B,39 B,48G,48,C,59D10,D21,IB,B10,B12,B208,B1,Roto Bale Loader, sp100 combine, allcrop 66, L3 Gleaner


Posted By: jaybmiller
Date Posted: 14 Jun 2021 at 5:43am
Ok, silly question, but...
how easy is it to rollover a rollover plow ?
do you just 'pull pin  rotate, lock  pin ' ?


-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water


Posted By: DiyDave
Date Posted: 14 Jun 2021 at 5:55am
Originally posted by jaybmiller jaybmiller wrote:

Ok, silly question, but...
how easy is it to rollover a rollover plow ?
do you just 'pull pin  rotate, lock  pin ' ?

Depends on the plow, some are manual, some are hyd assisted...Wink


-------------
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!


Posted By: ZachD89
Date Posted: 14 Jun 2021 at 5:16pm
Would anyone else on here happen to have one of these plows? The plow is manual roll and not hydraulic.

-------------
37 A,37 Waukesha B,35 WC,38 WF,M crawler,49 WF,49 WD,53 WD45,39 and 40 RC,47 WC,41 B,39 B,48G,48,C,59D10,D21,IB,B10,B12,B208,B1,Roto Bale Loader, sp100 combine, allcrop 66, L3 Gleaner


Posted By: WNYBill
Date Posted: 15 Jun 2021 at 8:51am
I would like to find a 2 bottom rollover but 3 pt. hitch.


Posted By: Fred in Pa
Date Posted: 15 Jun 2021 at 9:18am
Yes , I do. 

-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.


Posted By: Allis dave
Date Posted: 15 Jun 2021 at 10:19am
The issue with these is finding Plow shares. It's already hard to find Allis shares. It's impossible to find left hard shares. You'd have to try to find another color left hard share that was close and drill the frog to bolt on the share. 


Posted By: Fred in Pa
Date Posted: 15 Jun 2021 at 1:59pm
Not really impossible ,but cost more then right hand stuff when you do find it . And then that sets the tone for the real buyers n the tire kicker. 

-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net