5040 starter
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18107
Printed Date: 06 Feb 2025 at 12:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 5040 starter
Posted By: Doug(TN)
Subject: 5040 starter
Date Posted: 11 Sep 2010 at 9:06pm
|
The bendix gear of the starter of my 5040 would not disengage the flywheel. Took the starter apart and the fork between the solenoid and the starter is bad. Anyone know where I might find one? Half of the solenoid side is gone and the other is badly cracked.
Thanks,
Doug
mailto:Rosine123@comcast.net - Rosine123@comcast.net
 |
Replies:
Posted By: Fred in Pa
Date Posted: 12 Sep 2010 at 7:49am
| These units had differant starters on them .Name of starter and # needed . At one point we put a after market delco on them which turned out to be JUNK also. |
Posted By: Coke-in-MN
Date Posted: 12 Sep 2010 at 8:58am
|
http://www.prestolite.com/literature/stm/PP1184_Buyer_Guide_stm.pdf - http://www.prestolite.com/literature/stm/PP1184_Buyer_Guide_stm.pdf
Check your number and check the list to get a idea of what might work .
Try auto electric, rebuild shop to see if they can order or have one on old starter ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |