Farm Equipment - Allis B shift lever repair

Print Page | Close Window

Allis B shift lever repair

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=181023
Printed Date: 09 Apr 2026 at 5:15pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis B shift lever repair

Posted By: sks72107
Subject: Allis B shift lever repair
Date Posted: 06 Jun 2021 at 2:38pm

Fired up the B for the first time this spring and the shift lever was wacked up. It would go in one gear and that was about it. The lever was all floppy. Pulled the lever out today and it's obvious the end ball that contacts the forks is worn pretty good. It no longer looks like a ball, lot of worn flats. What size diameter ball should it be...or should it be a true ball? If anyone has any specs on this shifter lever to get it refurbed please post them. I.e. lower ball diameter and distance from the center of the pivot ball to the center of the lower ball. Thanks. I can fix this, just need to know what I'm restoring it too.