Series 1 D17 Hydraulic line help
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=180970
Printed Date: 01 Nov 2024 at 1:41am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Series 1 D17 Hydraulic line help
Posted By: ShieldFarm
Subject: Series 1 D17 Hydraulic line help
Date Posted: 03 Jun 2021 at 9:55pm
|
New to the forum I recently pick up a Series 1 D17 (SN 12689) , which is a really nice machine for the price except for one thing. The previous owner decided to remove the hydraulic lines that go to the transit valve, which consequently means my lift arms are dead
 . My major problem in making new lines is which fittings to use. Specifically, which fitting is used to connect the return line to the sump. The service/parts manual shows a oiler type tube ,if so what can I use to replace it . uploads/22126/IMG_20210601_193938823.jpg" rel="nofollow - uploads/22126/IMG_20210601_193938823.jpg |
Replies:
Posted By: ShieldFarm
Date Posted: 03 Jun 2021 at 10:00pm
|
Posted By: ShieldFarm
Date Posted: 03 Jun 2021 at 10:02pm
|
Posted By: Lon(MN)
Date Posted: 04 Jun 2021 at 6:55am
| I have some steel lines I removed from my D17. They have some non-factory bends in them. I would sell them if interested. |
Posted By: ShieldFarm
Date Posted: 05 Jun 2021 at 4:25pm
| Would you mind sending me some photos and measurements of the pressure and return lines? |