Farm Equipment - 200 parking brake

Print Page | Close Window

200 parking brake

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=180784
Printed Date: 07 Apr 2026 at 3:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 200 parking brake

Posted By: Mikez
Subject: 200 parking brake
Date Posted: 26 May 2021 at 6:49pm

Hello everyone.

I seem to remember a post on that topic but I couldn’t find it. Anyone remember it and can find it, I’m sure there’s more then one.

Thanks

Replies:

Posted By: FREEDGUY
Date Posted: 26 May 2021 at 8:47pm

What's your question/ailment with your 200 ?

Posted By: btred1466
Date Posted: 26 May 2021 at 9:54pm

Is this what you are trying to find?

https://www.allischalmers.com/forum/topic178174.html%20" rel="nofollow - https://www.allischalmers.com/forum/topic178061.html

https://www.allischalmers.com/forum/topic178061.html

I saved the topic.

Posted By: Mikez
Date Posted: 27 May 2021 at 10:32am

that was one of them thanks.

the other day something went wrong lol. It won’t release now. Couldn’t remember if any post mentioned that issue.

Posted By: DanWi
Date Posted: 27 May 2021 at 11:50am

Do you have one wheel that locked up when you hit the brakes or is the parking brake just not releasing? It could be as simple as a roll pin in your linkage or you could have a spring broken inside the brake or a lining coming apart and doubling up

Posted By: Mikez
Date Posted: 28 May 2021 at 7:50am

just the left brake pedal won’t come back up. Luckily didn’t push all the way and isn’t engaged. It appears the lever is still turning its little shaft

Posted By: Lonn
Date Posted: 28 May 2021 at 10:05am

I'd say the linkage behind the lever is frozen and rusted. I had a 200 years ago at the dealership where I worked and it had that issue. Had to get in by taking the rear side hood off and taking the linkage apart or oiling it up, can't quite remember as it has been 25 years ago.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: DanWi
Date Posted: 28 May 2021 at 6:16pm

I think just from memory there should be a spring behind the dash to lift the pedal up. Can you pull it back up with your foot or hand? Maybe the pivot shaft for the pedal is rusty, spray some lube on it.