190 xt second set of hydraulic outlets
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=18065
Printed Date: 06 Feb 2025 at 12:43pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190 xt second set of hydraulic outlets
Posted By: ribsplitter
Subject: 190 xt second set of hydraulic outlets
Date Posted: 11 Sep 2010 at 12:39am
|
buying a 190xt with one pair of hydralic outlets, has two hydralic controls how do i add a second set of outlets to use a 350 dual loader?
|
Replies:
Posted By: darrel in ND
Date Posted: 11 Sep 2010 at 5:55pm
|
I would guess that if the lever is there for a second set of coupler's, the valve and everything should be there also. Look under the operator's platform on the right hand side, directly under the levers, and you'll see where the control linkage from the levers connects to the valve stack, then see if the second lever is hooked onto a section of the valve stack. If there is a second valve stack there, you should be able to copy the hydraulic lines from the one set that is there, to put the second set on. P.S. If your tractor has a 3 PT on it, there'll be a valve stack section for it as well. I hope this somewhat helps Darrel
|
Posted By: Eldon (WA)
Date Posted: 11 Sep 2010 at 8:02pm
Darrel has it right, and if the valve is there I would think all you would have to do is remove the plugs and plumb hoses in.
-------------
ALLIS EXPRESS!
This year:
|
Posted By: SHAMELESS
Date Posted: 12 Sep 2010 at 3:36am
|
yeah...i bought a 180D with only one set hyd's, the plumbing was there for another set, i just took the plugs out and screwed a nipple with hyd couplers on.....and they worked!!
|
|