WTB AC 160 block/or complete engine
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=180417
Printed Date: 26 Dec 2024 at 11:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WTB AC 160 block/or complete engine
Posted By: AC720Man
Subject: WTB AC 160 block/or complete engine
Date Posted: 08 May 2021 at 11:48am
|
My best friends 160 started blowing antifreeze out the exhaust. After removing the head, it has cracks between the cylinder sleeves if I understood him correctly. He is wanting to find a good block or entire engine. He uses this tractor a lot and wants to get it repaired ASAP. Any help would be greatly appreciated. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Replies:
Posted By: Fred in Pa
Date Posted: 08 May 2021 at 4:40pm
|
Call Danny at 717-359-4848 week days 8 am to 5 pm he has a D 15 parts tractor . ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: AC720Man
Date Posted: 08 May 2021 at 10:02pm
|
Fred, I’m sorry, I should have stated a AC 160 tractor. Perkins diesel. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Fred in Pa
Date Posted: 10 May 2021 at 9:26am
Make sure the mounting holes are same on block where frame to engine mounts bolt to block , different hole spacing will need those blocks to frame .,and the the fuel filter housing bolts on block .Over the years I have changed just blocks n complete engines n run into this .  ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: AC720Man
Date Posted: 10 May 2021 at 2:18pm
|
Thanks Fred, no luck finding one yet ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AcFordHawk
Date Posted: 10 May 2021 at 7:42pm
|
Bit of a distance since most of the locations are central U.S. All State Ag Parts has six listed in their salvage section. Unknown is how long the tractors have been in the lot and if parts are already gone. Used to have the date received so could tell if the salvage was fairly new. Website: https://www.tractorpartsasap.com/ " rel="nofollow - https://www.tractorpartsasap.com/ ------------- IB (restoring), MF GC1705, MF 2705E |
Posted By: AC720Man
Date Posted: 10 May 2021 at 9:02pm
|
Thanks for the help guys, Gary got a confirmation this evening from a salvage yard in Pa that they have a good block. Confirmation by casting number on the block. Leaving at 4 am to get there when they open to pick it up. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |