Farm Equipment - 1350 cult hydraulic wing cylinder

Print Page | Close Window

1350 cult hydraulic wing cylinder

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=179881
Printed Date: 02 Apr 2026 at 8:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 1350 cult hydraulic wing cylinder

Posted By: automaticdave
Subject: 1350 cult hydraulic wing cylinder
Date Posted: 16 Apr 2021 at 7:24am

Need to reseal a 3.5" X 16" wing cylinder, what is the purpose of the two 1/4"x 1/2" bolts w/flat washers that screw into the end of the rod guide or (end cap)? I see the retaining ring in there witch looks like fun to remove ! Thanks Dave

Replies:

Posted By: Alvin M
Date Posted: 16 Apr 2021 at 11:14am

Take them out then push the end cap in to remove the retaining ring

Posted By: automaticdave
Date Posted: 16 Apr 2021 at 11:41am

Ya Alvin I see its to hold that end cap in the correct position after you re-assemble the clylinder. Dave

Posted By: Alvin M
Date Posted: 16 Apr 2021 at 11:58am

Yes it keeps the cap from going in when you use the cylinder

Posted By: IBWD MIke
Date Posted: 17 Apr 2021 at 7:34am

Going to have to dip my toe in this water one of these days. Have quite a few cylinders with issues around the farm. Always so many other 'more important' things to do.