Farm Equipment - c waterpump pulley removal

Print Page | Close Window

c waterpump pulley removal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=17926
Printed Date: 06 Feb 2025 at 9:12am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: c waterpump pulley removal

Posted By: tc
Subject: c waterpump pulley removal
Date Posted: 08 Sep 2010 at 3:46pm

Hello,
trying to put new water pump in, any ideas on how to get pump pulley off, i've taken adjusting bolt nuts off, do the bolts also come out? thanks

Replies:

Posted By: GlenninPA
Date Posted: 08 Sep 2010 at 3:50pm

Thought the 4 bolts that hold the fan on also capture the pulley. It seems as though they stick fast, but I do not remember taking the pulley apart at the adjusting nut.

It has been a while and CRS has set in, so I could be wrong.....

Posted By: Dakota Dave
Date Posted: 08 Sep 2010 at 3:52pm

On my CA I just took the four bolts holding the fan on and wacked the pulley and it came off. I'm sure My WD45 came apart the same way. you should not need to take the sheve adjusting bolts out.

Posted By: tc
Date Posted: 08 Sep 2010 at 5:51pm

finally got it using block of wood and hammer, thanks

Posted By: Hubert (Ga)engine7
Date Posted: 08 Sep 2010 at 8:18pm

If at first you can't fix it, get a bigger hammer. LOL

-------------
Just an old country boy saved by the grace of God.