WD spindle
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=179236
Printed Date: 15 Sep 2025 at 8:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD spindle
Posted By: Tim NH
Subject: WD spindle
Date Posted: 22 Mar 2021 at 7:54am
|
The front spindles require bearing spacers. My question is are they on there already, or what looks to be spacers just part of machining the spindle. Tim  ------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207 |
Replies:
Posted By: IBWD MIke
Date Posted: 22 Mar 2021 at 8:02am
|
The spacer is there. I have a couple of threads regarding this. You can see a spindle without the spacer in. Going to post an update in the gauge wheel thread directly. Here is a link to the spindle removal thread, it doesn't really show the pieces like I thought. I'll take a picture of the parts and post it here in a bit. https://www.allischalmers.com/forum/removing-spindle-wd-nfe_topic176334_post1490817.html?KW=#1490817" rel="nofollow - https://www.allischalmers.com/forum/removing-spindle-wd-nfe_topic176334_post1490817.html?KW=#1490817 |
Posted By: IBWD MIke
Date Posted: 22 Mar 2021 at 8:20am
|
Here is a picture of the spindle, (welded in a piece of plow frame) the original spacer in question, and the additional one I needed for the gauge wheel.  |
Posted By: ac45dave
Date Posted: 22 Mar 2021 at 9:01am
Tim, maybe this will help  ------------- 54 wd-45gas ; 56 wd-45d N/F w/fact p/s ; 63 d-17 sIII N/F gas ; 60 D14 N/F ; 67 d-17 sIV N/F gas ; 63D15 sII W/F; 39rc#667 ; 2021 massey 4710 fwa ; gravely 2 wheel tractors |
Posted By: Tim NH
Date Posted: 22 Mar 2021 at 9:24am
|
Thanks both of you guys. I thought those bushings that are on there are all I needed. Mike , when you got the spindle block off, can you see the seal up in there to change out. Tim ------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207 |
Posted By: IBWD MIke
Date Posted: 22 Mar 2021 at 9:37am
|
Tim, I never removed the spindle block. Pulled the spindle from a junk pedestal that was just sitting on the ground. |