HD5G in Idaho (part 2)
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=179215
Printed Date: 01 Dec 2024 at 4:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD5G in Idaho (part 2)
Posted By: Les Kerf
Subject: HD5G in Idaho (part 2)
Date Posted: 21 Mar 2021 at 8:41am
|
With the weather finally permitting, we got the track split and removed the right front idler; the gauge on the 50 ton press indicated 40 tons of force before the shaft moved. As you can see in the photo, it was not done soon enough. We need two (2) of these: RETAINER, bearing P/N 073646 Or perhaps drawings with dimensions so as to be able to build up and re-machine these. Thanks for the help.  |
Replies:
Posted By: gemdozer
Date Posted: 21 Mar 2021 at 5:15pm
| I check tomorrow if am still have some retainers bearing |
Posted By: Tad Wicks
Date Posted: 22 Mar 2021 at 10:32am
| Hey Les, That piece can be repaired or a new one fabricated as you stated if you can figure out dimensions, just a word to the wise, if you try to arc weld to most of those cast pieces they can turn harder than the hubs of hades. Brass or torch rod would be the way to go for me. Should Gemdozer have one, it might be a good idea to duplicate it to CAD for the next guy. Best of luck |
Posted By: gemdozer
Date Posted: 22 Mar 2021 at 4:32pm
| I 0nly have a retainer bearing 073646 but not in very good condition the stell ring and boot seal are losed in |
Posted By: gemdozer
Date Posted: 22 Mar 2021 at 5:35pm
| I made a mistake the seal rings and boot assambly are instaled in the bracket or in the retainer seal rings. |
Posted By: Les Kerf
Date Posted: 22 Mar 2021 at 6:12pm
If it is usable I am definitely interested. We are also in need of seals and bearings. Does anyone perchance have a complete idler for sale? |
gemdozer wrote:Posted By: gemdozer
Date Posted: 23 Mar 2021 at 6:02pm
|
I have the retainer bearing with the cup and used bearing and have a other one cup and bearing and have 2 rings sealand the parts are usable and no more boots spring assambly gemdozer@hotmail.com
|
Posted By: Les Kerf
Date Posted: 26 Mar 2021 at 9:36am
Thanks for the reply, I sent you an email. |