Print Page | Close Window

SP/AP46 Pistons with WD45 Crank

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=178794
Printed Date: 28 Mar 2024 at 7:24am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: SP/AP46 Pistons with WD45 Crank
Posted By: PA185
Subject: SP/AP46 Pistons with WD45 Crank
Date Posted: 04 Mar 2021 at 8:52am
Question about the AP/SP46 M&W, WD45 crank combo.
For the 13:1 compression set up will the factory felpro head gasket hold?
Or do you have to run a copper head gasket with an o ringed head?
Looking for input from people who have ran the set up or are familiar with it.



Replies:
Posted By: DrAllis
Date Posted: 04 Mar 2021 at 10:08am
I always used a stock OEM head gasket from the old days. Now, todays head gasket isn't the laminated metal one from yesteryear, but I still think you'll be OK. Do a cold retorque after you've run it a couple of times down the track. Ignition timing will need to be retarded somewhat with the higher compression.


Posted By: steve fischer
Date Posted: 09 Mar 2021 at 7:50am
I have run stock gaskets also have some extra ap46 and ap48 pistons



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net