Farm Equipment - gaining trans oil on d17 iv

Print Page | Close Window

gaining trans oil on d17 iv

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=17878
Printed Date: 06 Feb 2025 at 7:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: gaining trans oil on d17 iv

Posted By: Brian NC
Subject: gaining trans oil on d17 iv
Date Posted: 07 Sep 2010 at 8:20pm

I am losing hyd. oil and gaining trans oil. Is there a seal between power director / hyd sump other than trans input shaft seal. Where can i get these parts?

Replies:

Posted By: ChuckLuedtkeSEWI
Date Posted: 07 Sep 2010 at 8:24pm

I believe there is a seal on the pto shaft that seals between the two compartments. I'm sure someone else will chime in.

Posted By: DSeries4
Date Posted: 07 Sep 2010 at 9:50pm

It is the input shaft seal that needs replacing. AGCO carries them. You will have to split the tractor - might as well replace the other seals while you are at it.

Posted By: gcalent
Date Posted: 08 Sep 2010 at 9:29am

Your problem is most likely the PTO shaft seals there two of the placed together with the lip in opposite directions. The input shaft is up high enough that little if any oil will gravity through. You can get leakage through the input shaft on tractors with hydraulic power director cluthes, because of worn or broken seal rings.

-------------
Pullin With AC