Print Page | Close Window

One Sixty injector pump ??

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=17877
Printed Date: 06 Feb 2025 at 10:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: One Sixty injector pump ??
Posted By: AcFordHawk
Subject: One Sixty injector pump ??
Date Posted: 07 Sep 2010 at 8:06pm

Working through various items on the One Sixty I bought and finally got a chance to start it this weekend.  Found a leak in the fuel system and appears to be coming from the gasket under the control cover on the injector pump.  Thought at first it might be an injector line.  I don't see obvious bolts or screws but looks like a couple fasteners could be holding it on.  Is there external cover screws or are they internal and requiring the pump to be taken off and disassembled?  Thanks for any help or advice.




Replies:
Posted By: kip in cny
Date Posted: 07 Sep 2010 at 8:35pm

Is it a CAV pump ? a photo would help on this one



-------------
160 CA 920diesel 5020 HD-3


Posted By: injpumpEd
Date Posted: 07 Sep 2010 at 9:01pm
that is a CAV DPA pump. The top cover is held down by 2 acorn nuts on the top, between the throttle and shutoff levers. Those can be a pain in the rear to get sealed up. If you take it off, be sure to look at the position of the governor spring on the throttle lever as well as the governor lever. good luck. 

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!


Posted By: AcFordHawk
Date Posted: 07 Sep 2010 at 9:20pm
Thanks for the info.  I'll get a picture or two tomorrow after work and post, first diesel tractor I've dealt with and want to make sure I don't mess up timing, pump, etc. 


Posted By: AcFordHawk
Date Posted: 08 Sep 2010 at 8:37pm
Here is a pic of the pump.  End cap does say Lucas CAV on it. 
 


Posted By: injpumpEd
Date Posted: 08 Sep 2010 at 9:02pm
It looks to have been rebuilt within the last few years based on the DELPHI tag. 

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net