Print Page | Close Window

D 15 II piston Install?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=17848
Printed Date: 06 Feb 2025 at 7:07am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: D 15 II piston Install?
Posted By: Dave H
Subject: D 15 II piston Install?
Date Posted: 07 Sep 2010 at 10:43am
Well darn.  Wanted t put the pistons in the 160 block today but do not know how to work the off sets.  The manual gives reference to the piston pin clamp screw and 1 and 3 going in different on the rod end off set than 2 and 4.
 
Problem is that this motor has free floating piston rods with no pin clamp.
 
Can someone tell me how the off sets are positioned when the pistons are installed?
 


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net