Farm Equipment - gaskets

Print Page | Close Window

gaskets

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=17846
Printed Date: 06 Feb 2025 at 7:38am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: gaskets

Posted By: shadrake
Subject: gaskets
Date Posted: 07 Sep 2010 at 10:16am

I am restoring a old A/C WD-45. I am in need of some various gaskets from the transmission area. does anyone know of a good source to purchase various gaskets for a 1954 wd-45?

Replies:

Posted By: mlpankey
Date Posted: 07 Sep 2010 at 10:42am

Haney equipment athens al.

-------------
people if they don't already know it you can't tell them. quote yogi berra

Posted By: CTuckerNWIL
Date Posted: 07 Sep 2010 at 11:23am

Go to your local auto parts store and buy a roll of the appropriate thickness material. Get a pencil, a scissors and a ball peen hammer and make your own.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: shadrake
Date Posted: 07 Sep 2010 at 12:55pm

thanks, thats a great suggestion! I will stop on the way home today and get that material and cut my own!

Posted By: CTuckerNWIL
Date Posted: 07 Sep 2010 at 3:10pm

If you can lay the material over the mating part and keep it in place, just tap around all holes with the ball end of your ball peen and it will cut out holes.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Dakota Dave
Date Posted: 07 Sep 2010 at 3:18pm

Fruitloop Box works good

Posted By: Coke-in-MN
Date Posted: 07 Sep 2010 at 3:29pm

Now your giving away secrets used on British cycles for primary gasket, serial box opened up to give larhe gasket. tap around edgeswith hammer to mark outline , tap at holes to mark them and cut out . Goop with favorite gasket cement/sealer and put in place.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: CTuckerNWIL
Date Posted: 07 Sep 2010 at 3:34pm

Sorry Coke. LOL I don't use the tap around hole method much. I have a set of hole punches made when I did tool and die work.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Coke-in-MN
Date Posted: 07 Sep 2010 at 3:54pm

Dang guys and fancy tools , had to leave mine behind when i left the maint shop , then when I came back as Foreman there and later closed the shop the dang plumber ~~stole~~ them .. LOL Oops ment to say plumber got them before i did

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: Doug northern IL
Date Posted: 07 Sep 2010 at 9:51pm

gasket paper ball bearing over hole tap or hit with hammer perfect bolt hole