Print Page | Close Window

model M crawler

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=17831
Printed Date: 06 Feb 2025 at 8:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: model M crawler
Posted By: mike goucher
Subject: model M crawler
Date Posted: 06 Sep 2010 at 10:23pm
Hello I am looking for a parts source for the steering clutches and seals for my model M crawler. Any help would be appreciated. Thanx mike



Replies:
Posted By: Gary(OR)
Date Posted: 06 Sep 2010 at 10:57pm
Hello Mike, for clutches, click on the link below. He may be able to help with seals also.
 
http://www.tpaktopc.net/acmstrcltch.htm - http://www.tpaktopc.net/acmstrcltch.htm


Posted By: everett048
Date Posted: 07 Sep 2010 at 1:35am
Mike there are no seals as such in the rear end, depending on serial no there maybe on the later ones but the early ones certainley upto 1940 they were sealed around shaft by a gland pack nut with felt spiral inside if the oil seeped out u just tightened the nut up on the gland 1 notch at a time. h t h


Posted By: mike goucher
Date Posted: 07 Sep 2010 at 10:09pm
Thanx for the info guys!! I found all of the clutch parts on the website you suggested. And giving the existing seal a little TLC shouldn't be a problem either.
mike



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net