gleaner 226 motor/combine parts
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=177834
Printed Date: 23 Dec 2024 at 2:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: gleaner 226 motor/combine parts
Posted By: Randy(Mo)
Subject: gleaner 226 motor/combine parts
Date Posted: 25 Jan 2021 at 9:21pm
|
Parting out E gleaner, motor, header and any other parts you need, combine will be going to scrap, except motor, if nobody needs parts. this motor will also work in a d17 or wd tractor. text is best or call 573-690-3033. message will also work. can deliver smalls to Boonville swap meet on March 5 or 6 ------------- Mo Allis Club member |
Replies:
Posted By: Gary
Date Posted: 26 Jan 2021 at 8:14am
|
Have often wondered this: Will a WD or WD-45 'W Series' motor bolt up in place of a D-14, D-15, D-17 'G' Series Motor ? G |
Posted By: Calvin Schmidt
Date Posted: 26 Jan 2021 at 10:05am
|
Will fit WC-WD-WD-45-D17. Will not fit a D14/15. I've parted three Gleaner E's and all engines went into tractors Will have to or should use a tractor governor
------------- Nothing is impossible if it is properly financed |
Posted By: Gary
Date Posted: 26 Jan 2021 at 4:22pm
|
So that means a D-17 is a 'W' engine ? |
Posted By: Randy(Mo)
Date Posted: 26 Jan 2021 at 8:30pm
|
Motor is sold ------------- Mo Allis Club member |
Posted By: SteveM C/IL
Date Posted: 29 Jan 2021 at 11:32pm
No it's not a W engine. It is the same on the rear so it will bolt into WC/WD/WD45 chassis but the problem comes at the front end as D17 used longer pulley. There are "work arounds" but not just "bolt her in". I believe they are "G" engines.
|
Gary wrote:Posted By: DrAllis
Date Posted: 30 Jan 2021 at 6:41am
| W-201 and W-226 are from WC-WF-WD-WD45. The G-226 was from D-17's-170-175. |
Posted By: Gary
Date Posted: 30 Jan 2021 at 8:03am
|
Thanks Dr. So a D-17 G 226 will bolt up to a WD Torque Tube, but some mods are required at the front in order to install in a WD Eg crank pulley. G |