Farm Equipment - old AC planter

Print Page | Close Window

old AC planter

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=177824
Printed Date: 07 May 2024 at 3:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: old AC planter

Posted By: edmo
Subject: old AC planter
Date Posted: 25 Jan 2021 at 4:12pm

would love to post pics, but can't seem to reduce file size enough. Have an old AC corn planter (converted to 3-pt) that has a furrow blade and two 10" pigeon-toed disks in front

of it. The disks are on a single bent spindle with a grease fitting. Disks wobble a lot because they weren't greased, and spindles and hubs on disks are now cone shaped from wear. I can bore hubs and put in a bushing, the make and weld on new spindle ends, but looking for ideas. Sorry, hard to explain without pics.

Replies:

Posted By: Mikez
Date Posted: 27 Jan 2021 at 1:14pm

was there bearings in them or like a bushings

Posted By: tbran
Date Posted: 27 Jan 2021 at 10:01pm

agcopartsbooks.com enter a guest - look planters under agco allis 600 sries

-------------
When told "it's not the money,it's the principle", remember, it's always the money..

Posted By: tbran
Date Posted: 27 Jan 2021 at 10:02pm

https://na.epsilon1.agcocorp.com/p/agcoallis/79001645/l/122?tocGuid=f480a0a0-6f2e-b313-a2df-133f073095dd%20" rel="nofollow - https://na.epsilon1.agcocorp.com/p/agcoallis/79001645/l/122?tocGuid=f480a0a0-6f2e-b313-a2df-133f073095dd

-------------
When told "it's not the money,it's the principle", remember, it's always the money..