Farm Equipment - WD45 Hydraulic Lift Arm Schematic

Print Page | Close Window

WD45 Hydraulic Lift Arm Schematic

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=17778
Printed Date: 06 Feb 2025 at 6:02am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD45 Hydraulic Lift Arm Schematic

Posted By: lshaver
Subject: WD45 Hydraulic Lift Arm Schematic
Date Posted: 06 Sep 2010 at 9:51am

Hi All I am a total newbie that just purchased my first tractor a 1953 AC WD45. it came with a factory loader but I will want run a bush hog some day. First of all the hydraulic lines are disconnected from the snap coupling lift arm cylinders. I am not sure how to connect the cylinders to the manifold. There id currently on 1/2" line coming off of the left side if the block port 1 that is capped on the other left side port there is a hose with a quick connect coupler that is dangling so I am not sure how to connect to cylinders to the manifold block.

Also I am looking for a good 3-point conversion kit to convert the snap coupler to a standard 3-point hitch.Can anybody let me know where I can find a good one that is from a company that will ship to Canada, I am not able to find any Canadian Dealers. I live in Niagara Falls Ontario which is right next to the border. Thank you very much in adfvance for helping out a total newbie.Larry