Print Page | Close Window

8050 front plate oil leak update.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=177206
Printed Date: 09 Apr 2026 at 2:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 8050 front plate oil leak update.
Posted By: Leon B MO
Subject: 8050 front plate oil leak update.
Date Posted: 01 Jan 2021 at 5:05pm
Got the tractor tore down and plate removed. The dowel pins were ok but the dowel holes in the front plate were worn to .510. So took it and front timing cover to a local machinist. He insisted on measuring the block itself so he came out to do that. He bored the holes out for a bushing and installed them. It fits the block very nice, no wiggle at all. Started putting it back together yesterday. I did locktight the five bolts that hold the plate to the block. The pump and idler gears also meshed together nicely. Here's some pics of what he did. 
Leon B MO






-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".



Replies:
Posted By: tbran
Date Posted: 01 Jan 2021 at 5:32pm
looks good, just no silicone up here...

-------------
When told "it's not the money,it's the principle", remember, it's always the money..


Posted By: Leon B MO
Date Posted: 01 Jan 2021 at 7:13pm
I used a very thin layer of ultra black. Thats what my ol AC mechanic suggested He said he's done this on several 301's.
Leon B Mo

-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".


Posted By: Leon B MO
Date Posted: 01 Jan 2021 at 7:26pm
I hope to have it running soon. I ordered the wrong o ring for water pump so I have to reorder Monday and wait.
Leon B Mo

-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net