Look what I found,,,,
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=177192
Printed Date: 18 Sep 2025 at 5:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Look what I found,,,,
Posted By: TomYaz
Subject: Look what I found,,,,
Date Posted: 01 Jan 2021 at 8:40am
Just finishing tagging and bagging over 1000 NOS pieces, and look what I found at the bottom of the barrell: ------------- If its not an All-Crop, it all crap! |
Replies:
Posted By: JohnColo
Date Posted: 01 Jan 2021 at 2:00pm
| Cool, collectors item! |
Posted By: TomYaz
Date Posted: 01 Jan 2021 at 2:14pm
|
So thats what they used to do those !!@$@%%% square head nuts! ------------- If its not an All-Crop, it all crap! |
Posted By: Dave(inMA)
Date Posted: 01 Jan 2021 at 2:18pm
|
Great find, Tom! Looks like it'd be handy for loosening the spinout clamps. ------------- WC, CA, D14, WD45 |
Posted By: BigGuy1000
Date Posted: 01 Jan 2021 at 3:07pm
|
Is it the right size for spinout clamps???? How long is it??? Not enough leverage by itself!!!! |
Posted By: Brian G. NY
Date Posted: 01 Jan 2021 at 3:29pm
|
I stumbled on prior discussions of this wrench years ago on this site. It makes sense that it might be a plow wrench since A-C bought the LaCrosse Plow Works in 1929. https://www.allischalmers.com/forum/allis-wrench_topic66952.html" rel="nofollow - https://www.allischalmers.com/forum/allis-wrench_topic66952.html
|
Posted By: GSTROM99
Date Posted: 01 Jan 2021 at 3:44pm
Good memory Brian! |
Posted By: JayIN
Date Posted: 02 Jan 2021 at 4:06pm
|
A friend gave me one of those 20 years ago. I've always called it a plow wrench. ------------- sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?" |
Posted By: Dave(inMA)
Date Posted: 03 Jan 2021 at 3:37am
|
Likely not long enough for spinout clamps by itself...I keep a length of pipe handy in the shop and slide it over a wrench to get more leverage, but maybe the geometry doesn't work. Just wondering if it fit. ------------- WC, CA, D14, WD45 |