Farm Equipment - Allis G arrived here

Print Page | Close Window

Allis G arrived here

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=177134
Printed Date: 02 May 2025 at 12:07pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis G arrived here

Posted By: captaindana
Subject: Allis G arrived here
Date Posted: 30 Dec 2020 at 5:46am

Yesterday. I never needed nor wanted one but the one guy I fly had purchased it at an Aumann auction and said he didn’t feel the love for it 2 years later and gave it to me. The motor is locked up but the rest is in nice shape. For the past 2 years I have soaked the cylinders with diesel and atf but she’s still locked up. I’ll start disassembly of the Continental N65 as time allows. Thanks. Dana

-------------
Blue Skies and Tail Winds
Dana

Replies:

Posted By: jaybmiller
Date Posted: 30 Dec 2020 at 5:56am

yeah, they're a 'love/hate' thing... I've had 3, wished I'd kept the first one,oh well....

I'm kinda surprised about it still being locked... if you could get just a little bit of movement,it'd probably free up...I tossed pipewrench on D-14#1 PTO shaft,got maybe 5-10* CW,then 5-10*CCW.Every day tried to turn ,just a wee bit more,LOTS of 'oil/atf',took 2 weeks before she'd spin 360...

NO sleeves in that engine BUT they are available. Found that out with G#3.

Jay

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: JoeM(GA)
Date Posted: 30 Dec 2020 at 7:17am

second on the ATF/acetone, give it a a little wiggle with a ratchet on the crank bolt every day and she'll break free. Watch them Dana, they multiply like rabbits, you'll have a barn full!

-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB

Posted By: captaindana
Date Posted: 30 Dec 2020 at 7:41am

Well now.....”G Girl” arrived in stall number 15 and stall #16 will be occupied shortly. Hoping they do NOT reproduce too quickly! Lol. She was born Nov 1954.

-------------
Blue Skies and Tail Winds
Dana

Posted By: Dusty MI
Date Posted: 30 Dec 2020 at 3:54pm

I have a '48 G with hydraulics.

The G uses the same transmission as the B & C.

Dusty

-------------
917 H, '48 G, '65 D-10 series III "Allis Express"

Posted By: captaindana
Date Posted: 30 Dec 2020 at 8:01pm

Wow I did not know that Dusty thank you. I took the head off of the engine and finally got it to free up. I’ll put it back together with all new gaskets hoses tuneup kits brakes radiator repair and rebuilt carb just to name a few. More to come. Thanks! Dana

-------------
Blue Skies and Tail Winds
Dana

Posted By: PaulB
Date Posted: 30 Dec 2020 at 8:10pm

I've never been all that excited about them. Half the tractor, takes up as much floor space and everything costs twice what the same thing would cost for a B. I've had a bunch of them over the years and luckily someone else wanted to own them more than I did. The one I hated the worst was the one with hydraulic lift. They are designed to steer with your left hand and where did the boneheads put the lift lever, but under the left of the seat. As I only have one left hand I did like the hand lift ones slightly better.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: Bill Long
Date Posted: 30 Dec 2020 at 8:58pm

Yes, it is a B-C transmission. More than likely a B transmission since the C had a slightly different second gear. Bolted to the front is the housing for the "creeper gear" As you know there is a shaft with a slot that becomes part of the gear shift pattern. Even when we were selling them back in the 40's and 50's the shaft got out of the gear shift area. To fix it we had to go through the shift lever opening, find the shifting shaft, and reposition it in the gear shift pattern.

Best plowing tractor I sold.

Keep us updated. You have a neat unit.

Happy New Year!

Good Luck!

Bill Long

Posted By: JohnColo
Date Posted: 30 Dec 2020 at 9:32pm

Between my renter and me, we have six, four are running at this time but my second one is close to being finished, converted it to 12 volts with one of those little alternators so no sheet metal has to be messed with. Each machine has an implement more or less permanently attached as time is money when you are growing 100 different veggies on 15 acres.

Posted By: shameless dude
Date Posted: 31 Dec 2020 at 12:26am

think NIXON auction has a "G" on an upcoming sale

Posted By: captaindana
Date Posted: 31 Dec 2020 at 5:09pm

Ok y’all I can’t find anyone whom has a valve and head gasket kit. W T Heck?

-------------
Blue Skies and Tail Winds
Dana

Posted By: JoeM(GA)
Date Posted: 31 Dec 2020 at 5:25pm

It’s my understanding that there haven’t been any for several months
I’m sure the crud-19 stopped them from getting imported

Sent you a PM

-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB

Posted By: captaindana
Date Posted: 31 Dec 2020 at 6:58pm

Awesome! Thanks!

-------------
Blue Skies and Tail Winds
Dana

Posted By: Coke-in-MN
Date Posted: 31 Dec 2020 at 7:18pm

Friend here has one for sale also - with hyd lift .
He used it for his small tree farm but has now been used for years now .
Think i posted his info somewhere on here a while back

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: allischalmerguy
Date Posted: 31 Dec 2020 at 8:48pm

Gifted a G! Awesome Dana!!

-------------
It is great being a disciple of Jesus! 1950 WD, 1957 D17...retired in Iowa,

Posted By: captaindana
Date Posted: 01 Jan 2021 at 4:08pm

Yes and now I am the caretaker and will fix Her right up proper and pretty😀

-------------
Blue Skies and Tail Winds
Dana