G Plow part number needed
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=177021
Printed Date: 20 Sep 2025 at 6:54pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: G Plow part number needed
Posted By: DSeries4
Subject: G Plow part number needed
Date Posted: 23 Dec 2020 at 9:10pm
|
I am looking for the part number for the small piece on the right side in each of these pictures. I am trying to describe it to someone who is not on the internet, and not having much luck. The part number would solve my dilemma. I couldn't find it on the AGCO site or in the book I have. Any help would be appreciated.   It is the angled piece here...  ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Replies:
Posted By: JoeM(GA)
Date Posted: 24 Dec 2020 at 6:01am
|
It’s called a “tie strap” in the plow assembly manual, but not shown or part number given in any of my plow or lift assembly manuals. That picture is one I did for someone maybe 15 years ago, where did you find that? ------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |
Posted By: Bud(WI)
Date Posted: 24 Dec 2020 at 6:17am
|
possibly 319706 - tie assy., lift arm - #20 on page 6 of the G Implements parts catalog |
Posted By: JoeM(GA)
Date Posted: 24 Dec 2020 at 7:42am
Very possible Bud, almost not shown ------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |
Posted By: DSeries4
Date Posted: 24 Dec 2020 at 8:54pm
I saw it posted up here years ago and saved it to my computer. I knew it was a part that I needed for mine. Now is the time for me to do something about it. Thanks Joe! ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
JoeM(GA) wrote:Posted By: Bill Long
Date Posted: 25 Dec 2020 at 8:34pm
|
Just be certain you put one on when plowing Without it you can damage the lift arm. Good Luck! Bill Long
|
Posted By: fleeter allis fan
Date Posted: 29 Dec 2020 at 11:08am
|
I also have a G with a plow and after seeing that photo, checked my own machine. That part is missing on my tractor also. In my case, the lift arm has been broken in the past and has been repaired with a pretty ugly weld at the spot where that part bolts on. The bolt hole has been obscured by the weld. It is hard to tell from the photo what the other end attaches to.It looks like it would not be too hard to fabricate that part if you had the dimentions. Can anyone provide some measurements for that part and maybe some additional photos? ------------- I'm a man...and I can change...if I have to... I guess. '44 B, '46 WF, '49 G, 810GT, 916H, 620 |
Posted By: fleeter allis fan
Date Posted: 29 Dec 2020 at 11:17am
Duh... After looking a bit closer, I see that there are some dimensions included in the first photos. Shouldn't be too hard to fabricate that part, if I can figure out exactly where it attaches. Additional photos would help a lot. Thanks.
------------- I'm a man...and I can change...if I have to... I guess. '44 B, '46 WF, '49 G, 810GT, 916H, 620 |
Posted By: JoeM(GA)
Date Posted: 29 Dec 2020 at 12:08pm
|
see if this helps, yell if more info needed    ------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |
Posted By: fleeter allis fan
Date Posted: 31 Dec 2020 at 1:21pm
|
Thanks Joe. Now we're talking. A picture is sometimes worth 1000 words.
------------- I'm a man...and I can change...if I have to... I guess. '44 B, '46 WF, '49 G, 810GT, 916H, 620 |