Say hello to more of my little friends
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=176987
Printed Date: 29 Aug 2025 at 4:04pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Say hello to more of my little friends
Posted By: TomYaz
Subject: Say hello to more of my little friends
Date Posted: 22 Dec 2020 at 6:07pm
Trying to figure what machine they go to! ------------- If its not an All-Crop, it all crap! |
Replies:
Posted By: DiyDave
Date Posted: 22 Dec 2020 at 8:19pm
Top right corner is a pen... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: TomYaz
Date Posted: 22 Dec 2020 at 8:24pm
Ok but what implement does it go on!!??? ------------- If its not an All-Crop, it all crap! |
DiyDave wrote:Posted By: TomYaz
Date Posted: 22 Dec 2020 at 8:24pm
Wait let me guess....checkbook? ------------- If its not an All-Crop, it all crap! |
Posted By: Pfouts Family Farm
Date Posted: 22 Dec 2020 at 9:25pm
|
210536 replaced by 218741 - clutch shaft E563 power unit - If this is the bearing in the pic I would think that it is actually 210541 - clutch shaft bearing 802094 - all mowers (WC, RC, B, C etc) 604431 - replaced by 519750 -is a LaPorte part# -models 60-90sa, 90,95,110,112, 66CHd, SDR, 2A, 2E, 4C, 3A, 140, 140-S, 180, 195, C-630 604476 - replaced by 519751 - is a LaPorte part # - models 2A, 2E, 3A, 4C, #4, 140, 180, 140-S, 100SP, 90, 72, SDR, B,C,WC&RC MOWERS, 90, 95 c-630 unfortunately my master parts book is missing the index for laporte that tells what the model abbreviations stand for. I could guess but I'll leave this to someone else
|
Posted By: FREEDGUY
Date Posted: 22 Dec 2020 at 9:36pm
|
You had a previous picture that showed a "turn buckle" type tube that reminded me of a part we had to replace on a linkage on a 4 bottom 3 point mounted AC "steerable" plow ?? I didn't see that part in your recent pics .
|
Posted By: Mikez
Date Posted: 22 Dec 2020 at 9:39pm
| 802094 hold straps to wood pitman |
Posted By: TomYaz
Date Posted: 22 Dec 2020 at 9:53pm
Well didnt want to repost the same parts again. The part you are talking about is 802160. ------------- If its not an All-Crop, it all crap! |
Posted By: TomYaz
Date Posted: 22 Dec 2020 at 9:55pm
?? that must be a deep pitman? what machine? ------------- If its not an All-Crop, it all crap! |
Posted By: FREEDGUY
Date Posted: 22 Dec 2020 at 10:04pm
The part that I saw and asked about was on your classified pic, lower right part. Apparently the majority of your parts pertain to mowers though. Hopefully some one can make use of them
. |
Posted By: TomYaz
Date Posted: 22 Dec 2020 at 10:05pm
Thanks! Also You said 210536 - -- its 210736 ------------- If its not an All-Crop, it all crap! |
Posted By: TomYaz
Date Posted: 22 Dec 2020 at 10:06pm
Actually after all-crop parts, the most nos is for roto-balers. ------------- If its not an All-Crop, it all crap! |
Posted By: TomYaz
Date Posted: 22 Dec 2020 at 10:07pm
Yes that part you are talking about is 802160. What it goes to I dont know trying to find out. ------------- If its not an All-Crop, it all crap! |
Posted By: Mikez
Date Posted: 22 Dec 2020 at 10:48pm
| 802160 is also pitman mower |
Posted By: TomYaz
Date Posted: 22 Dec 2020 at 10:52pm
who knows...bag says 802160, 802160 is stamped on the part ------------- If its not an All-Crop, it all crap! |
Posted By: Pfouts Family Farm
Date Posted: 23 Dec 2020 at 5:17am
|
my bad.... you have to look up in a couple places and I must have changed the number somewhere. 210736 - listed as a bearing - model "cooper only" (I would assume for the cooper oil field tractors??) 802160 - COUPLING - MODELS #5, B,C,B IND MOWERS
|
Posted By: BigJake
Date Posted: 23 Dec 2020 at 6:47pm
|
LTP-31 - replaced by 340410 LTP-41 - replaced by 340435 Used on the adjustment lever for the moldboard plows.
|
Posted By: TomYaz
Date Posted: 23 Dec 2020 at 8:16pm
Thanks! ------------- If its not an All-Crop, it all crap! |