Farm Equipment - Interchange of narrow front ends

Print Page | Close Window

Interchange of narrow front ends

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=17669
Printed Date: 06 Feb 2025 at 3:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Interchange of narrow front ends

Posted By: den/southern illinoi
Subject: Interchange of narrow front ends
Date Posted: 03 Sep 2010 at 6:55pm

I have a D 17 narrow front end pedestal and a guy that needs a pedestal for his narrow front D 14. I know the parts #s are different. So my question is...will the D 17 pedestal fit the 14 and if so...what is the difference? Thanks, Den

-------------

Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts.

Replies:

Posted By: JoeO(CMO)
Date Posted: 03 Sep 2010 at 8:07pm

I would check the splines on the shaft, coarse or fine.

The height is different.

If complete change the width of frame is wider on D17.

-------------

Posted By: den/southern illinoi
Date Posted: 03 Sep 2010 at 9:41pm

He's just talking about the pedestal. I figured the D 17 may be a little taller, never thought about the splines maybe being different. Thanks, Den

-------------

Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts.

Posted By: tomwestky
Date Posted: 04 Sep 2010 at 7:17am

Denny, I have a D14 pedestal...complete from the front support on the top to the wheel hubs. The front support is apart. I'd replace the bearings and the bottom seal. $50 (By the way...been to your place...bought two rear wheels several years ago)
Tom Westerfield
Crofton, KY