D15 front spindle
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=175781
Printed Date: 18 Aug 2025 at 12:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D15 front spindle
Posted By: Pitbull
Subject: D15 front spindle
Date Posted: 07 Nov 2020 at 4:08pm
|
My D15 has the early one piece solid front axle (wide front end). The newer design has a two piece adjustable axle. The spindles are different - the obvious difference is the ID of inner wheel bearings. Newer spindle may be slightly longer vertically - 12" as opposed to 11 3/4" Can I use the newer spindles that are readily available and simply change the inner wheel bearing? There was one washer at the bottom of vertical shaft. My measurement of 11 3/4" was taken with washer removed. The key way is very badly worn on my spindle. |
Replies:
Posted By: DiyDave
Date Posted: 07 Nov 2020 at 5:24pm
My advice would be to talk to Brenda @ Sandy Lake equipment, she'd know! ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |