FS: Loader for D10
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=175780
Printed Date: 27 Dec 2024 at 2:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: FS: Loader for D10
Posted By: PaulB
Subject: FS: Loader for D10
Date Posted: 07 Nov 2020 at 3:11pm
I have full hydraulic Henry built Industrial loader for a D10 available. Sells with everything as removed for $1000 or trade for something I'd find useful. I need some tires of various sizes, wheel weights for smaller 100 series CASE tractors (the 75 pounders, casting #G-1092), a 3 speed 727 from an 89-90 Dodge diesel or maybe something else. Cylinders were not leaking. Pump drive broke than I found out all of the other problems the tractor had and the tractor became a parts tractor. Located in Maryland, very near Gettysburg, Pa.     ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Replies:
Posted By: RMD
Date Posted: 07 Nov 2020 at 3:50pm
| Paul, is that a L-99 loader? if so, I have the manual for it. |
Posted By: PaulB
Date Posted: 07 Nov 2020 at 7:49pm
|
This is a HENRY built loader, for the D10 tractors. The tag shows the model number to be L-IC2. The L-99 is a later Allis built loader. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: RMD
Date Posted: 08 Nov 2020 at 3:39pm
|
The L-99 was also built by Henry. Mine has a tag saying "Manufactured for Allis-Chalmers Mfg. Co. by Henry Mfg. Co. I believe mine came with my Series II D-12 when it was first purchased c. 1963. Allis Chalmers didn't acquire Henry until 1968 (according to Swinford's book). My L-99 looks a lot like the one in your pictures except that it looks like your bucket is narrower (the L-99 material bucket is 60 inches wide).
|
Posted By: PaulB
Date Posted: 09 Nov 2020 at 7:07am
|
As the tractor that was under this loader is in the 1959 serial number range, This was most likely a "cleared companion" loader before Allis Chalmers became financially involved with Henry Manufacturing. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: PaulB
Date Posted: 03 Dec 2020 at 3:50pm
still available, make an offer ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: JJZ
Date Posted: 31 May 2021 at 6:56am
| Do you still have this loader |
Posted By: PaulB
Date Posted: 31 May 2021 at 7:55pm
|
Yes, it's still available: PM sent. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: JJZ
Date Posted: 02 Jun 2021 at 5:58am
|
Hi Paul my name is Joe if you can give me a call at 717-939-8320 |